On the KUHN Vari-Leader plows, cutting width can be adjusted on-the-go from the cab. This is beneficial for plowing in smaller and non-square fields, and when plowing different soil types.
Using the KUHN Vari-Leader plow, operators will benefit from a number of features including reinforced box sections, rapid adjustment of furrow widths and superior protection systems. Working right up to the edge of the field is necessary to get the most out of your cropland, while limiting weed development. To meet this requirement, KUHN has integrated the wheel extremely close to the frame due to its shape. An extra-large wheel reduces pulling power requirements, provides good bearing capacity and allows for operation in difficult end-of-season conditions.
Heavy-Duty Components for an Increased Machine Life
Non-Stop Hydraulic (NSH) Reset
When a field obstacle is met, a rapid breakaway of the plow leg occurs. Once the obstacle is passed there is an increase in pressure, bringing the bottom quickly and firmly back into working position. The system also acts as a shock absorber in rocky ground, increasing plow life.
Triplex Steel
Moldboards are made of unequal layer, heat-treated Triplex steel that have an increased working life up to 40% over standard steel and a hard wearing surface over 1/8” thick.
Headstock and Frame
For added reliability, the structure is made using a large, machine-welded frame measuring approximately 7” x 7”.
Moldboard Choices to Match Your Needs
H4 Moldboard
The H4, helicoidal, Scandinavian-type moldboard provides well-formed plowing to a normal depth range of 7-12”. The share is fitted with a reversible/replaceable point that greatly increases the life of the share. Recommended for fall plowing, the H4 moldboard is especially suited for heavy and damp clays. Furrow passes are well defined and trash burial is excellent.
N Moldboard
The helico-cylindrical N moldboard plows to a depth of 14”. Designed to be highly versatile, it is cylindrical at front, helicoidal at rear. A low draft ensures a partly broken furrow with excellent trash burial. Recommended for spring plowing, this moldboard is versatile and works well in sandy or clay soils.
VP Slatted Moldboard
VP Slatted Moldboard: The VP slatted moldboard composed of independent and interchangeable slats. Reduces pulling power, due to a lower moldboard surface area. Designed for use in extremely sticky muck and clay soils. Not for use in sand or loam soils or in soils with rocks or stones. The multiple slats allow individual replacement from wear.
Enhance your In-Field Productivity
On-Land Offset
On-land offset is available to enhance productivity. The soil sometimes requires wide or dual tires that cannot be used for in-furrow plowing. If the tractor is setup for other applications that require duals or wide tires, if equipped with the on-land kit it is no longer necessary to dismount the wheels in order to use the tractor for plowing.
Hydraulic Valves
Hydraulic sequencing comes standard meaning fewer valves to operate during headland turns. Ease of use is always important when handling large machinery. With this system, there are fewer hydraulic valves to operate on headlands. Hydraulic sequencing also allows for automatic folding of the offset when the plow is being lifted.
Skimmers
Each skimmer is totally independent left from right and is firmly held in a sheath-like support. The skimmers are shear bolt protected and are adjustable in three directions:
1- Forward and backward-with a choice of three positions, the sheath bolts to the leg support via countersunk holes to avoid any risk of free play.
2- Up and down-rapid and precise height adjustments (8” of adjustment) with countersunk holes in the skimmer leg for easy locking of the leg for the desired height.
3- Side to side – for correct adjustment in relation to disc coulter (where fitted).
Welcome to H & L Motors. We have two locations. One is in Glenboro, Manitoba just west of the Highway 2 & 5 junction at this location we are a full Sales , Service and Parts Agricultural Dealership and also a full Automobile Repair Facility. The second location is in Blumenort, Manitoba and this location is an Agricultural Sales, Service and Parts location. l Our family owned business has been serving the Prairies for over 30 years. We cater to all of your short-line agricultural needs.
Farm Implement Sales & Service
See our new product lines on our Equipment Lines page. If it's used equipment you're in the market for, please visit our Used Inventory Section. Our service and parts department can provide service for any make or model of farm equipment, either on your site or ours.
Automotive Repair, Parts & Maintenance Shop
H & L Motors services all makes and models of automobiles for your convenience. Our full-service shop can provide you with peace of mind, knowing that we have staff certified to handle your needs. We have a wide variety of automotive tires and parts and amenities to handle any job, big or small.
706440US_Semi-MountedPlows_WEB.pdf
