Monday | 7:30AM - 8:00PM |
Tuesday | 7:30AM - 8:00PM |
Wednesday | 7:30AM - 8:00PM |
Thursday | 7:30AM - 8:00PM |
Friday | 7:30AM - 8:00PM |
Saturday | 8:00AM - 8:00PM |
Sunday | 9:00AM - 8:00PM |
Monday | 7:00AM - 6:00PM |
Tuesday | 7:00AM - 6:00PM |
Wednesday | 7:00AM - 6:00PM |
Thursday | 7:00AM - 6:00PM |
Friday | 7:00AM - 6:00PM |
Saturday | 8:30AM - 5:30PM |
Sunday | Closed |
Horizontal four auger mixers in a trailer version with capacities from 260 to 900 cubic feet. The mixing augers are pto driven, the door and discharge are hydraulically operated. The heavy duty horizontal four-auger design are capable of giving the mix required, from rations with well cured, long stemmed legume-type hay, to mixes with green grass, and mixes with silage and commodities. Better milk production, better weight gains and greatly improved animal health are just some of the results of a finely-tuned feed ration. |
![]() Provides a thorough mix with less HP |
![]() Heavy duty planetary gear reduction to reduce input HP |
![]() One location to lubricate all drive components |
![]() Heavy duty sealed bearings on the drive end of all augers |
![]() The addition of a ledger with a shear bar near the augers increases the cutting for those harder to mix rations |
![]() 1/4" thick steel bottoms with an extra 1/4" thick steel liner for additional wear resistance |
![]() The rear oil bath allows for continuous lubrication of chains and sprockets |
![]() For extra visibilty when travelling in low-light conditions |
![]() A slip clutch PTO to protect the driveline |
![]() A Digi-Star four point scale system is standard |
![]() |
![]() For fast and complete unloading of your ration |
![]() Easily adjustable hitch with replaceable clevis |
![]() For added protection against damage |
![]() Special lengths of discharge chutes to meet your unloading requirements |
![]() Give more cutting power to your augers in higher hay rations with bolt-on tungsten coated knives |
![]() Raise and lower the discharge from the comfort of your cab |
![]() Increase cutting action where most of the resistance occurs - at the discharge door. Switch out the knife for a paddle to increase discharge action |
![]() Add a magnet in the discharge flap to remove unwanted metal fragments |
![]() Several options of stainless liners are available on all our Horizontal mixers |
![]() Add a flap to the discharge chute for increased control while unloading |
See the download section for more information. |
![]() A number of tire options are available |
![]() We like our standard LuckNow blue - but you don't have to. Ask about our colour selection |