HLA

         2,000 LB Cap. - Heavy Duty Pallet Fork 1½” x 3 1/8” Class II hook type solid fork lift tines 2000 lbs capacity @ 24" L.C. C/w...

         4,200 LB Cap. - Heavy Duty Pallet Fork 1-3/8” x 4” Class II hook type solid fork lift tines 4200 lbs capacity @ 20" L.C. C/w...

        5,500 LB Cap. - Heavy Duty Pallet Fork 1½” x 4” Class II hook type solid fork lift tines 5500 lbs capacity @24" L.C. C/w guard...

        7,500 LB Cap. - Heavy Duty Pallet Fork 1¾” x 5” Class III hook type solid fork lift tines 7500 lbs capacity @ 24" L.C. C/w guard...

        10,000 LB Cap. - Heavy Duty Pallet Fork 2" x 6" Class III hook type solid fork lift tines 10,000 lbs capacity @ 24" L.C. C/w guard...

        Bucket Pallet Fork Adaptable to most buckets No tools or bolts needed ...

       Heavy Duty Stone Fork & Regular Utility Grapple Same great features as regular & heavy duty stone forks Opens up to 70" Comes...

       Manure Fork & Regular Utility Grapple Opens up to 70" Comes with 2-½"x 8" cylinders ...

      Manure Fork (Cranked Kverneland Tine) LDFE 32” Conus I cranked Kverneland tines (28” useable length) MFE 35" Conus I cranked...

      Pallet Fork Tine Extensions (Nursery) Fits HD42 & HD55 forks Optional tine extensions with angled pad for gentle clamping of root...

       Pallet Fork Tine Extensions (Standard) Fits HD42 & HD55 forks NOTE: Tine extensions reduce the capacity of your pallet fork. ...

       Power Tilting Pallet Fork Rotation is powered by a cylinder for smooth operation Adjustable tines Levels 45 degrees each way Great for...

      Power Tine Pallet Fork Hydraulic sliding tines Ideal for clamping (such as a root ball in nurseries etc.) Hyd. powered tines move in and...

         Regular Duty Stone Fork & Regular Utility Grapple Same great features as regular & heavy duty stone forks Opens up to 70"...

         Rotating Pallet Fork Rotation is powered by a cylinder for smooth and contoured operation Adjustable tines Rotates 180° for a full...

        Side Shift Pallet Fork Hydraulic carriage side shift 16" travel (8" right or left) Adjustable tines ...

      Stone Fork (Cranked Kverneland Tine) 39" Conus II cranked Kverneland tines (32" useable length) Tines installed on 4" centres Ruggedly...

       Stone Fork (Landscape with Power Rake) ¾" shaft diameter 1-¾" spacing between tines Points are ½" thick, 400 Brinell high strength...

     Stone Fork (Retainer Style Tine) - HEAVY DUTY HEAVY DUTY 1-¾" shaft diameter 2-¾" spacing between tines Points are ¾" thick, 400...

   Stone Fork (Retainer Style Tine) COMPACT DUTY 1" Shaft diameter 2-½" spacing between tines Points are ⅝" thick, 400 Brinell high strength...

   Stone Fork (Retainer Style Tine) REGULAR DUTY REGULAR DUTY 1-¼" shaft diameter 2-½" spacing between tines Points are 5/8" thick, 400...

  Stone Fork (Retainer Style Tine) with Split Grapple - HEAVY DUTY HEAVY DUTY - UP TO 9500 LB CAPACITY Two independent grapples Ideal for brush...

 Stone Fork (Retainer Style Tine) with Split Grapple - REGULAR DUTY REGULAR DUTY - UP TO 5500 LB CAPACITY Two independent grapples Ideal for...

  Compact Brush Grapple w/ Electric Actuator Opens to 38" wide from ground to point of grapple Tine tips and grapple tips are AR400 material...

 Round Bale Grapple (BG4000) Designed for gentle handling of heavy wrapped silage bales Lockable arms, one arm can be locked in a fixed position...

Square Bale Grapple (BG6000) Same specs and design as round bale grapple with arms to accept square bales 4 - 6 ft long and round bales 5-6 ft...

Square Bale Squeeze (BG7000) 86" extended – 30" Retracted Arms are 50” long, 20” tall 2-½" x 28" stroke cylinder Slim brace arm design...

Compact Utility Grapple To be fitted on models SBC, MBC & LDFE Heavy duty welded cylinder Opens up to 37-½" ...

Regular Utility Grapple Can be fitted to models SB, SBHV, MB, MBHV, MFE, & SFR Accommodates 4ft round bales Works equally well on other...

Large Utility Grapple Can be fitted to models SB, SBHV, MB, MBHV, MBHVX, & THMB (Does not fit THMBHV & THMBHVX buckets) Specific heavy...

Extra Large Utility Grapple Can be fitted to THMBHV & THMBHVX buckets Specific heavy duty design for handling large round and square bales...

Single Arm Log Grapple Removable log grapple for pallet forks Clamps onto Class II or III fork frame (walk through guards only) C/w Hydraulic...

Log Grapple Grapple version of HD55/HD75 pallet fork 42" solid fork lift tines 5500/7500 lbs capacity C/w HD Cylinders ...

Debris Grapple Fork Two independent grapples Replaceable tempered tines eliminate the need for a support bar at points which reduces lodging and...

Manure Fork with Cranked Kverneland Tine & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes...

Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms...

Low Profile Skidsteer Bucket & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes with 2-1/2" x...

Standard Skidsteer Bucket & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes with 2-1/2" x 8"...

Scrap Grapple Bucket (Skidsteer) Two independent grapples 1/4" material, 3/8" end plates 3/4 X 6 bevelled cutting edge Ideal for awkward abrasive...

Compact Scrap Grapple Bucket (Skidsteer) 3/16" material, 1/4" end plates 3/4 X 4 bevelled cutting edge Single grapple arm 26" overall height 26"...

Compact Brush Grapple Opens to 38" wide from ground to point of grapple Tine tips and grapple tips are AR400 material Tine spacing 6" on center...

Brush Grapple Opens to 48" wide from ground to point of grapple Tine tips and grapple tips are AR400 material Tine spacing 5-1/2" between...

Light Duty Root Rake c/w Hydraulic Grapple Light weight with rugged design for compact loaders 28" overall height when closed 7-3/8" centre to...

Light Duty Root Rake c/w Electric Grapple Light weight with rugged design for compact loaders 28" overall height when closed 7 3/8" centre to...

Root Rake c/w Grapple Two independent grapples for complete clamping on awkward loads 34" overall height when closed Points are 1/2" thick, 400...

Hydraulic Bale Claw Ideal for handling stacked large square bales 12 hydraulic claws rotate into stack for secure handling 72" overall height...

Hydraulic Rotary Broom Unique lateral and forward float Gauge wheels Includes electric selector valve and wire kit (if you do not choose OEM...

Hydraulic Rotary Pick-up Broom Ideal for cleaning up parking lots, construction sites, streets, curbs and gutters as well as parks and recreation...

Heavy Duty Rubber Free Stall Scraper with Back Drag Heavy duty rubber for longer life Deeper scraper for more volume and smoother operation...

Heavy Duty Rubber Free Stall Scraper Heavy duty rubber for longer life Deeper scraper for more volume and smoother operation Enclosed frame with...

Rubber Feed Alley Scraper Power angle Easy on concrete or tiled floor mangers 24" high Angles 45° either direction ...

Hydraulic Adjustable Rubber Scraper Heavy duty rubber for longer life Hydraulic flow divider for equal movement of wings 24" tall rubber ...

Silage Facer - Bucket Mount Minimum 20 GPM required Maximum flow 40 GPM Facing drum mounted on bucket 400 Brinell high tensile steel teeth on...

Silage Facer - Frame Mount Minimum 20 GPM required Maximum flow 40 GPM Facing drum mounted on a 4 ft frame 400 Brinell high tensile steel teeth...

Silage Grapple Bucket Heavy duty grapple integrated into the bucket design Strategic pivoting arc design on the grapple for more power and less...

5000 Series Silage Blade - Front Wheel Assist Tractors For front wheel assist tractors only Compatible with SB5QDM Series undercarriage blade...

Bale Knife - Loader Mount Slice bales up to 72" in diameter Proprietary grabber holds and retains plastic and net wrap, eliminates “tail”...

6000 Series Silage Blade Designed for articulated tractors only Quick attach design Heavy duty construction Dual hydraulic angle cylinders Dual...

Single Three Point Hitch Spear Reese receiver / ball hitch (Ball hitch not included) Fits both CAT I & II Kverneland tine 2 stabilizer tines...

Double Three Point Hitch Spear Reese receiver / ball hitch (Ball hitch not included) Fits both CAT I & II Kverneland tine Available with 39"...